Reply to thread

Message

<blockquote data-quote="Doxquzme" data-source="post: 8877178" data-attributes="member: 689267">That driver is fairly inefficient. It will want all of that 400 or close to it. The driver requires a 1.25 (really more like 1.5 stuffed) cu ft box if you want any low end out of it in a sealed setup. It would do okay in a 1.75 cu ft box ported. From kicker:<ul>
<li data-xf-list-type="ul">Minimum Enclosure Volume: 1.25 ft³ with a 10½&quot; x 2&quot; x 20&quot; slot port</li>
<li data-xf-list-type="ul">Maximum Enclosure Volume: 1.75 ft³ with a 10½&quot; x 2½&quot; x 20&quot; slot port</li>
</ul>Honestly, you should get some substantial output in any case. Could be a defective amp. You used the kicker LOC then you need to set the amps input to low level in or in the &quot;out&quot; position on that amp.A better amplifier solution would be these:[URL unfurl=&quot;true&quot;]https://www.amazon.com/dp/B0BMVXC6HZ/?tag=caraudiocom-20[/URL]&nbsp;- OR -[URL unfurl=&quot;true&quot;]https://www.amazon.com/dp/B09PCZLZMG/?tag=caraudiocom-20[/URL]</blockquote>

[QUOTE="Doxquzme, post: 8877178, member: 689267"] That driver is fairly inefficient. It will want all of that 400 or close to it. The driver requires a 1.25 (really more like 1.5 stuffed) cu ft box if you want any low end out of it in a sealed setup. It would do okay in a 1.75 cu ft box ported. From kicker: [LIST] [*][B]Minimum Enclosure Volume:[/B] 1.25 ft³ with a 10½" x 2" x 20" slot port [*][B]Maximum Enclosure Volume:[/B] 1.75 ft³ with a 10½" x 2½" x 20" slot port [/LIST] Honestly, you should get some substantial output in any case. Could be a defective amp. You used the kicker LOC then you need to [B]set the amps input to low level in or in the "out" position on that amp[/B]. A better amplifier solution would be these: [URL unfurl="true"]https://www.amazon.com/dp/B0BMVXC6HZ/?tag=caraudiocom-20[/URL] - OR - [URL unfurl="true"]https://www.amazon.com/dp/B09PCZLZMG/?tag=caraudiocom-20[/URL] [/QUOTE]

Verification