1. Product:
Diamond D5 600.4 4 channel amplifer
2. Specs:
12.v
D5 600.4
75W x 4 @ 4 Ohm Stereo
150W x 4 @ 2 Ohm Stereo
300W x 2 Bridged @ 4 Ohms
Fuse 30a x 3
3. Description/Condition:
Very well built Diamond monster 4 channel amplifier, cosmetics are pretty good no major dings or scraches, This amp was made in 2002 and is from the same year the legendary D7 amplifiers when Diamond Audio was at the peak of their game.
I have this on my bench running a pair of JVC 2 way on the front and a 4ohm 8" driver on the rear outputs. Amp has a TON of clean power sounds great doing it!
This D5 has a very deep crossover network here is a small blurb about it from the manual.
http://www.diamondaudio.com/manuals/d5_4_channel_amplifier_manual-2002.pdf
All Diamond Audio D5 amplifiers employ one of the most flexible internal
crossover sections currently available in mobile audio. They feature secondorder
12dB/octave Butterworth filters. These filter networks sum to a flat
response at their -3dB break points. This results in a smooth and seamless
transition from one frequency band to the next. Butterworth filters provide
maximally flat frequency responses when compared to other filter structures.
All crossover controls are mounted on the signal side of the amplifier. The D5
600.4 crossovers are continuously variable, lowpass from 50Hz to 5kHz,
highpass from 15Hz to 1.5kHz or 1.5kHz to 15kHz using x10 button. Each pair
of channels has an individual network that can be configured to Highpass,
Lowpass, Bandpass or All-pass by simple switch selection. When switched off,
they are completely out of the audio path. The Ch 3/4 crossover also features
a mono/stereo switch that when pushed in to mono will series the two
crossovers to a fourth-order 24dB/octave filter for subwoofer systems.
4. Price: :
Asking 250.00 shipped obo, No trades on this one!
5. Pictures:
Gut shot from Ampguts, I do not wish to take mine apart.
Diamond D5 600.4 4 channel amplifer
2. Specs:
12.v
D5 600.4
75W x 4 @ 4 Ohm Stereo
150W x 4 @ 2 Ohm Stereo
300W x 2 Bridged @ 4 Ohms
Fuse 30a x 3
3. Description/Condition:
Very well built Diamond monster 4 channel amplifier, cosmetics are pretty good no major dings or scraches, This amp was made in 2002 and is from the same year the legendary D7 amplifiers when Diamond Audio was at the peak of their game.
I have this on my bench running a pair of JVC 2 way on the front and a 4ohm 8" driver on the rear outputs. Amp has a TON of clean power sounds great doing it!
This D5 has a very deep crossover network here is a small blurb about it from the manual.
http://www.diamondaudio.com/manuals/d5_4_channel_amplifier_manual-2002.pdf
All Diamond Audio D5 amplifiers employ one of the most flexible internal
crossover sections currently available in mobile audio. They feature secondorder
12dB/octave Butterworth filters. These filter networks sum to a flat
response at their -3dB break points. This results in a smooth and seamless
transition from one frequency band to the next. Butterworth filters provide
maximally flat frequency responses when compared to other filter structures.
All crossover controls are mounted on the signal side of the amplifier. The D5
600.4 crossovers are continuously variable, lowpass from 50Hz to 5kHz,
highpass from 15Hz to 1.5kHz or 1.5kHz to 15kHz using x10 button. Each pair
of channels has an individual network that can be configured to Highpass,
Lowpass, Bandpass or All-pass by simple switch selection. When switched off,
they are completely out of the audio path. The Ch 3/4 crossover also features
a mono/stereo switch that when pushed in to mono will series the two
crossovers to a fourth-order 24dB/octave filter for subwoofer systems.
4. Price: :
Asking 250.00 shipped obo, No trades on this one!
5. Pictures:
Gut shot from Ampguts, I do not wish to take mine apart.
