Reply to thread

Message

<blockquote data-quote="Justintoxicated" data-source="post: 2728345" data-attributes="member: 561240">Well I can&#039;t fit Fi&#039;s anyways unless I got the SSD (5.75 mounting depth max).&nbsp; Even fi themselves recommended I try an AA Assassin if ai wanted more SQ.&nbsp; I did, and it&#039;s nice but I want more...Now I&#039;m wondering what they changed in their 07 line-up if anything.&nbsp; RMS according to Diamond&#039;s website is 500watts but everyone on here is saying they need alot more power....I sceen different specs listed for D6&#039;s could one spec be for an older version?I hear you on the D6 1500.1 thats why I did not even consider it as well.&nbsp; My Amps have to go under my front seats as I don&#039;t have the crew cab, just the King Cab and there is no room on the backwall the seats are right up against it....&nbsp; Luckily I hear the D5 series were rated at 12v and are capable of putting out more power than rated (in a smaller footprint than their new amps as well).I also heard the board was designed by Robert Zeff on this amp...Where I&#039;m confused is the amp has 140 amp fuse (I believe) but uses 4ga wire.&nbsp; My 4ga wire from knukonceptz says it is only rated for 120 amps.&nbsp; I found a 120 amp maxi fuse but now I&#039;m being told the Streetwires Dual Fused distro block may not be able to handle the 120 amp maxi...So how the hell does anyone run power to these things....</blockquote>

[QUOTE="Justintoxicated, post: 2728345, member: 561240"] Well I can't fit Fi's anyways unless I got the SSD (5.75 mounting depth max). Even fi themselves recommended I try an AA Assassin if ai wanted more SQ. I did, and it's nice but I want more... Now I'm wondering what they changed in their 07 line-up if anything. RMS according to Diamond's website is 500watts but everyone on here is saying they need alot more power.... I sceen different specs listed for D6's could one spec be for an older version? I hear you on the D6 1500.1 thats why I did not even consider it as well. My Amps have to go under my front seats as I don't have the crew cab, just the King Cab and there is no room on the backwall the seats are right up against it.... Luckily I hear the D5 series were rated at 12v and are capable of putting out more power than rated (in a smaller footprint than their new amps as well). I also heard the board was designed by Robert Zeff on this amp... Where I'm confused is the amp has 140 amp fuse (I believe) but uses 4ga wire. My 4ga wire from knukonceptz says it is only rated for 120 amps. I found a 120 amp maxi fuse but now I'm being told the Streetwires Dual Fused distro block may not be able to handle the 120 amp maxi... So how the hell does anyone run power to these things.... [/QUOTE]

Verification