Reply to thread

Message: <blockquote data-quote="Babs" data-source="post: 3175535" data-attributes="member: 567066">When I researched this unit, I downloaded the install and ops manuals.. I found nothing like a networking type of switch.. Appears to be very conventional.. 4 channels and sub and x-over between them.. But there are separate x-over points for front and rear channels.. which is where they get the misleading 3-way x-over spec.. Still it's limit is 200 hz.So, you could go 3-way frontstage, just not active (from the head unit) to tweets/mids.. They'd share a channel for time alignment and and get their filtering and post-head unit by another active xover before the amps, or passive after the amps.</blockquote>

Top