Reply to thread

Message

<blockquote data-quote="johnnydanja" data-source="post: 8240256" data-attributes="member: 655653">Ideally I&#039;d like to do it with the 600w amp I currently have as I&#039;d have to buy a new amp and I just bought this sub(TS-SWX251) but at the same time I don&#039;t want it to sound horrible after all the time and money i&#039;ve put into it. Would I be able to run everything off the one amp and have it still sound good or would I have to buy another amp. The sub says its rated to 800w what size amp would I have to get should I buy a separate amp? Also, wiring help for all these options would be really helpful. In terms of doing it all on the amp. How do I wire two sets of speakers to one channel? and also in this case how do I run the rca&#039;s properly. As I said it has 3 rca outs, f, r, and sw and the amp itself only has 2 inputs. Second if I wire my rears off the HU how do I wire again with the rca&#039;s. The rears used to run to a stock amp in the car so I would run them to the hu and then attach them to the harness and also run a set of rca&#039;s to the amp? I assume this would require some tweaking of the settings to run it in both modes? Finally with the extra amp I assume you just run the sw rcas to the seperate amp and the f and r to the other amp. Seems a lot simpler but also a lot more costly and work. Thanks for your help any suggestions are welcome. ---------- Post added at 09:34 AM ---------- Previous post was at 09:33 AM ---------- Sorry did I say 1 set rca inputs? I meant 2 input one output but I&#039;m wondering what I do as the deck itself has 3 rca outs(f,r,sw)</blockquote>

[QUOTE="johnnydanja, post: 8240256, member: 655653"] Ideally I'd like to do it with the 600w amp I currently have as I'd have to buy a new amp and I just bought this sub(TS-SWX251) but at the same time I don't want it to sound horrible after all the time and money i've put into it. Would I be able to run everything off the one amp and have it still sound good or would I have to buy another amp. The sub says its rated to 800w what size amp would I have to get should I buy a separate amp? Also, wiring help for all these options would be really helpful. In terms of doing it all on the amp. How do I wire two sets of speakers to one channel? and also in this case how do I run the rca's properly. As I said it has 3 rca outs, f, r, and sw and the amp itself only has 2 inputs. Second if I wire my rears off the HU how do I wire again with the rca's. The rears used to run to a stock amp in the car so I would run them to the hu and then attach them to the harness and also run a set of rca's to the amp? I assume this would require some tweaking of the settings to run it in both modes? Finally with the extra amp I assume you just run the sw rcas to the seperate amp and the f and r to the other amp. Seems a lot simpler but also a lot more costly and work. Thanks for your help any suggestions are welcome. [COLOR=Silver] [/COLOR] [COLOR=Silver][SIZE=8px]---------- Post added at 09:34 AM ---------- Previous post was at 09:33 AM ----------[/SIZE][/COLOR][SIZE=8px][/SIZE] [COLOR=Silver] [/COLOR] Sorry did I say 1 set rca inputs? I meant 2 input one output but I'm wondering what I do as the deck itself has 3 rca outs(f,r,sw) [/QUOTE]

Verification