Reply to thread

Message

<blockquote data-quote="jer_stud56" data-source="post: 4590105" data-attributes="member: 542686">It was randomly working once in a while for one &quot;bump&quot; of the subs...then back off.I found some different RCA cables...no go there. Took off my ground, sanded the connector and made sure I could get off all the paint underneath it...no problem there. Turns on fine.Checked with the DMM...getting 12.46 volts when off...14.45 when car is started.My KnuKonceptz RCAs don&#039;t work when I check them with the DMM //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gifbut the RCAs I changed to worked on the DMM when I checked them...but the amp wasn&#039;t working.I&#039;m gonna take the subs out tomorrow and check them...although I&#039;m getting ~2.2 ohms per sub when I checked them so they seem fine.Ugh...frustrating. I&#039;ve had some problems before that I have been able to fix, but this one is ridiculous.Also took the back cover off my amp. There IS a dark spot where my amp went bad before, but I got that fixed before but the connection still seems to be fine right now. Maybe I&#039;ll order another amp...I think that has to be the problem. Something went wrong inside and I have no idea what.Anyone else have any more suggestions before I order a new amp?BTW the subs are in series.</blockquote>

[QUOTE="jer_stud56, post: 4590105, member: 542686"] It was randomly working once in a while for one "bump" of the subs...then back off. I found some different RCA cables...no go there. Took off my ground, sanded the connector and made sure I could get off all the paint underneath it...no problem there. Turns on fine. Checked with the DMM...getting 12.46 volts when off...14.45 when car is started. My KnuKonceptz RCAs don't work when I check them with the DMM [IMG]//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif[/IMG] but the RCAs I changed to worked on the DMM when I checked them...but the amp wasn't working. I'm gonna take the subs out tomorrow and check them...although I'm getting ~2.2 ohms per sub when I checked them so they seem fine. Ugh...frustrating. I've had some problems before that I have been able to fix, but this one is ridiculous. Also took the back cover off my amp. There IS a dark spot where my amp went bad before, but I got that fixed before but the connection still seems to be fine right now. Maybe I'll order another amp...I think that has to be the problem. Something went wrong inside and I have no idea what. Anyone else have any more suggestions before I order a new amp? BTW the subs are in series. [/QUOTE]

Verification