Reply to thread

Message

<blockquote data-quote="Bad4health" data-source="post: 6972290" data-attributes="member: 614385">box was giving me problems so i built another one. like my last one its 45 inches wide, 19 tall, 20 deep, ported at 33hz but this time i finished painting the inside of the port and did a 45 inthe port corner. cutting the 45 was wat cut my finger. also found out another reason y it wasnt as loud....my trunk latch was broken at the spot welds and cracked the metal so it was up about 2 inches from closing letting tons of air out the back and around the trunk.pics of damage<img src="http://i206.photobucket.com/albums/bb214/ooxj2000/IMG00612-20100817-1748.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />i put 2 self tapping scres on the side of it to hold it down<img src="http://i206.photobucket.com/albums/bb214/ooxj2000/IMG00615-20100817-1946.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />45 in the corner<img src="http://i206.photobucket.com/albums/bb214/ooxj2000/IMG00617-20100817-2157.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />not really sure why i did that<img src="http://i206.photobucket.com/albums/bb214/ooxj2000/IMG00620-20100817-2157.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />also it was a lil flexy so i braced the inside and again 3 inch screws through all sides<img src="http://i206.photobucket.com/albums/bb214/ooxj2000/IMG00619-20100817-2157.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></blockquote>

[QUOTE="Bad4health, post: 6972290, member: 614385"] box was giving me problems so i built another one. like my last one its 45 inches wide, 19 tall, 20 deep, ported at 33hz but this time i finished painting the inside of the port and did a 45 inthe port corner. cutting the 45 was wat cut my finger. also found out another reason y it wasnt as loud....my trunk latch was broken at the spot welds and cracked the metal so it was up about 2 inches from closing letting tons of air out the back and around the trunk. pics of damage [IMG]http://i206.photobucket.com/albums/bb214/ooxj2000/IMG00612-20100817-1748.jpg[/IMG] i put 2 self tapping scres on the side of it to hold it down [IMG]http://i206.photobucket.com/albums/bb214/ooxj2000/IMG00615-20100817-1946.jpg[/IMG] 45 in the corner [IMG]http://i206.photobucket.com/albums/bb214/ooxj2000/IMG00617-20100817-2157.jpg[/IMG] not really sure why i did that [IMG]http://i206.photobucket.com/albums/bb214/ooxj2000/IMG00620-20100817-2157.jpg[/IMG] also it was a lil flexy so i braced the inside and again 3 inch screws through all sides [IMG]http://i206.photobucket.com/albums/bb214/ooxj2000/IMG00619-20100817-2157.jpg[/IMG] [/QUOTE]

Verification