Cutlist Plus for you shitheads

[IgnoreMe 5,000+ posts]

here is a nice program for for making cut sheets. Its called Cutlist Plus.

ever get tired of trying to figure out how much sheets of mdf you will need when building big boxes?

ever get tired of the guy at home depot trying to figure it out for you?

ever get tired of watching him try to get all the cuts you need out of a single sheet of mdf, only to have him/you cut the sheet just right so you need to buy a full 4x8 sheet just to get that little 12"x 16" piece?

well here. this is from my own little collection that i downloaded from demonoid before it kicked the bucket. it comes with a code to use so you can get unlimited items. and it will automatically orientate the cuts so that you get the most use out of your sheet of mdf/plywood etc. if you are lazy and like the easy way out, this program is for you. the non-lazy need not complain, or apply //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif. enjoy. all i ask for in return is a vote for Ron Paul....

http://www.megaupload.com/?d=CNSMGZHW

Click to read more...

 

[bjfish11 5,000+ posts]

Thats the program that I use //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[jblayz1 10+ year member]

do you have to login to d/l the file?

 

[Colt9699 10+ year member]

where is the serial number at?

I d/l and installed and dont see a serial.

 

[profundus-sanus 10+ year member]

the serial is in the document other than the setup program...

 

[djman37 5,000+ posts]

i use a similar program itemizer7.0 it's a demo and only does 1 sheet w/o the key WHICH I HAVE LOST from back in the good ol' days.

 

[Colt9699 10+ year member]

the serial is in the document other than the setup program...

there is just the program and a ms info doc.

no serial

 

[djman37 5,000+ posts]

there is just the program and a ms info doc.
no serial

i haven't tried to open this one yet, but typically you open the .nfo with wordpad to see the magic.

 

[Colt9699 10+ year member]

i haven't tried to open this one yet, but typically you open the .nfo with wordpad to see the magic.

found it! thanks

 

[mfenske 10+ year member]

I downloaded a version the other day and I couldn't figure out how to program it for an angled/trapezoid type piece. Anyone able to steer me in the correct direction?

 

[flexxissues 10+ year member]

where do i click to download this on the website?

 

[Immacomputer 10+ year member]

I've used it in the past and I always like my layouts better. My layouts are always more logical if using a table saw to get all the cuts done without having to adjust the fence which means all cuts come out exact. The program is pretty useful if you're in a hurry though.

 

[Megalomaniac 5,000+ posts]

where do i click to download this on the website?

you guys are hacker n00bs. I have premium membership anyways on that site

however you type in those 3 letters for the image verification and then wait like 45 seconds and download link will show up.

also you need flash to view page properly

 

[Megalomaniac 5,000+ posts]

I've used it in the past and I always like my layouts better. My layouts are always more logical if using a table saw to get all the cuts done without having to adjust the fence which means all cuts come out exact. The program is pretty useful if you're in a hurry though.

your layout looked very good, and you seem talented when it comes to designing too //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[tsenfw 10+ year member]

I've used it in the past and I always like my layouts better. My layouts are always more logical if using a table saw to get all the cuts done without having to adjust the fence which means all cuts come out exact. The program is pretty useful if you're in a hurry though.

+1

I find it hella easier to cut all pieces of the same size at once, even though it wastes some wood, it comes out more exact when using a less than professional grade table saw.