Custom S-10 Extended Cab (Hydros)

[Deephitters Mag 10+ year member]

Very nice ride man even though im not a fan of the audio selections you went with. but very nice ride man . gl with sale.

Thanks but I had nothing to do with that setup, if i was to rebuild I would do 4 15" 9500 MTX in a wall tuned at 32 and 2 AB 500.1 for bass. Beyma for my mids/highs

Met the kid that built it a few times. It was a display truck for Audiobahn at a few of the bigger audio events a few years ago. Nice setup.

J was the orginal owner of the truck and he has another truck that looks alot like this one. I guess he built two of them

Nice truck at a good price for all the work thats done

Thanks, i hope it sells.

LMAO my bad i tend to speak my opinion loudly ill erase it

Please go right ahead and express yourself, it's America

 

[ughhibye 10+ year member]

Truck dont look bad. just a few things you should fix (buyers may see the little flaws and that is a big turnoff some times in the sport truck scene.

1 straighten the mirror its about 3/16 off . should be able to pull off the door panel lossen the bolt and rotate the mirror so its parallel with the body line.

2 the rear notch cover looks to be like there is a gap or its barely above the bed rail. ease down to the auto parts store and get some edging it looks like a C you can put that on the edge also.

also if you hit the seats with a damp rag and a heat gun they should tighten up on the seats

 

[tc300 10+ year member]

audiobahn in a nice truck like this.......... W T F lol

 

[Deephitters Mag 10+ year member]

Truck dont look bad. just a few things you should fix (buyers may see the little flaws and that is a big turnoff some times in the sport truck scene.
1 straighten the mirror its about 3/16 off . should be able to pull off the door panel lossen the bolt and rotate the mirror so its parallel with the body line.

2 the rear notch cover looks to be like there is a gap or its barely above the bed rail. ease down to the auto parts store and get some edging it looks like a C you can put that on the edge also.

also if you hit the seats with a damp rag and a heat gun they should tighten up on the seats

lol ok, I will copy and save this one in case I do keep the truck and then work on it. For now it sells as is and I think it has minor flaws. I can make it a monster but don't feel like doing anything to it right now. Thanks for the critique

 

[Deephitters Mag 10+ year member]

bump

 

[Louisiana_CRX 5,000+ posts]

dang i wish you were closer....i'd probally buy it...

 

[Deephitters Mag 10+ year member]

dang i wish you were closer....i'd probally buy it...

I can have it shipped to you