Reply to thread

Message

<blockquote data-quote="NSTALN" data-source="post: 5782150" data-attributes="member: 588169"><p>I&#039;m thinking about changing my system. I currently have a TC3k 15 running off of a Kenwood Excelon 401m getting about 800rms. It is quite loud and sounds pretty good. However I am thinking about getting a Rockford 25 to life 5 channel which puts out about 900rms into a 1ohm load. I&#039;m looking for SQ with lots of output. Box will be about 2.5 sealed. I&#039;m wondering if I will see much of a difference in output or SQ from switching from the TC3k to a CCS SDX15. The numbers for the two drivers are similar in the fact that they can handle about the same power, work in similar sized enclosures, and have the same Xmax capability. Anyone out there have experience with both drivers? The last SQ sub I had(and really loved) was an Audiomobile Mass series...I would love to find a single 15 that can match that kind of SQ from 800-1000rms and under 3cubes sealed. Thanks folks.</p></blockquote><p></p>

[QUOTE="NSTALN, post: 5782150, member: 588169"] I'm thinking about changing my system. I currently have a TC3k 15 running off of a Kenwood Excelon 401m getting about 800rms. It is quite loud and sounds pretty good. However I am thinking about getting a Rockford 25 to life 5 channel which puts out about 900rms into a 1ohm load. I'm looking for SQ with lots of output. Box will be about 2.5 sealed. I'm wondering if I will see much of a difference in output or SQ from switching from the TC3k to a CCS SDX15. The numbers for the two drivers are similar in the fact that they can handle about the same power, work in similar sized enclosures, and have the same Xmax capability. Anyone out there have experience with both drivers? The last SQ sub I had(and really loved) was an Audiomobile Mass series...I would love to find a single 15 that can match that kind of SQ from 800-1000rms and under 3cubes sealed. Thanks folks. [/QUOTE]

Verification