Reply to thread

Message: <blockquote data-quote="joker4096" data-source="post: 6014999" data-attributes="member: 578187"><p>Ok, so i have had this amp for over a year, it use to run fine.  First setup was 2 RE audio sx dual 4 ohms and they ran fine.  Now I have a soundstream tarantula t5 12 dual 2 ohm.  I was running a 60 amp fuse agu on the power line for a while and it started to pop them.  2 in less than a week.  the amp has 2 50 amp fuses so i know i was under doing it with the inline fuse.  my remote wire had a tear in it causing the system to come on and off a lot.  got that fixed and now the amp goes into protect every time i turn it on.  the power led turns on and immediately goes to protect.  i unhooked the rca, and speaker wires and it does the same. I opened the amp and nothing looked burned out or anything.   anyone know how to diagnose this?  If you can repair it i will pay you  im in the seattle, wa area</p></blockquote><p></p>

Top