Crunch 3000d-pro..handle .67ohms ok?

[flexxissues 10+ year member]

I have been serarching all over and havent seen anything about lower than 1 ohm..

I want to run 1 3000d-pro on 3 DD 1508's that are dual 4ohm.. so a .67ohm load

Will this amp be able to hadel that without issues?

Click to read more...

 

[duece212 5,000+ posts]

if you have a stout electrical, most likely

Go check on termpro, lots of guys running them at .5

 

[flexxissues 10+ year member]

if you have a stout electrical, most likely
Go check on termpro, lots of guys running them at .5

I plan on it being 12 volt electrical. i have a deka 9A31 in the back and will have a 9a34 under the hood.

 

[01 S 10 10+ year member]

i would get another 9a31 for the back.. you should be ok, after imp rise it will probably run right at 1 ohm or a little higher. what size box?

 

[flexxissues 10+ year member]

i would get another 9a31 for the back.. you should be ok, after imp rise it will probably run right at 1 ohm or a little higher. what size box?

Im in the first stages of my build, i just got the car. No box is built yet. i have 4 deka intimidators right now but i dont wanna be weighing down the wrx with them. i will put the one in the back for comps and put just 2 subs for daily in a diff box. When i compete i will toss the battery in and the box with the 3rd sub

 

[profundus-sanus 10+ year member]

won't do it on a 16v electrical but on 12v you'll be fine

 

[flexxissues 10+ year member]

won't do it on a 16v electrical but on 12v you'll be fine

ok thanks for the input //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[roarzorz 10+ year member]

It should easily handle that.

 

[flexxissues 10+ year member]

It should easily handle that.

Thanks bro, im deff gonna pick one up after i sell my batts