Reply to thread

Message: <blockquote data-quote="maylar" data-source="post: 18619" data-attributes="member: 541144">A couple of options come to mind:1) If the fuse block is accessible, you may find an unused spot that turns on with the ignition.2) Use the same wire that feeds your head unit.3) Tap into the amp's big power wire with a small 1 amp inline fuse and switch it through a relay. Run the relay coil off the remote.There's also the possibility that you'll still get noise with any of these options, if the noise is being radiated in the air and not induced into the power wire. Check this by moving the fan away from the amp and see if the noise goes away. If it does, you need a quieter fan.</blockquote>

Top