Reply to thread

Message

<blockquote data-quote="droopdog7" data-source="post: 8730651" data-attributes="member: 681686">When I installed my after market HU (using a PAC harness), the directions had me connecting 4 blue and blue/white wires together (see image below).&nbsp; The 2 blue wires appear to relate to the antenna and the two blue/white wires to the amp turn on.&nbsp; So now that I want to install the sub, I have ZERO idea how to make the remote on connection.&nbsp; I figure there are about four possibilities:-tie the blue wire from the powered sub to this entire bundle (so five wires together)-tie the blue wire from the powered sub to the blue/white from the Sony HU-tie the blue wire from the powered sub to the blue/white from the PAC-tie the blue wire from the powered sub both blue/whites (from the PAC and the Sony HU)In all cases, I imagine the remaining wires would be bundled together.&nbsp; Does anyone have any idea how this is supposed to work?&nbsp; Thanks.[ATTACH=full]25873[/ATTACH]</blockquote>

[QUOTE="droopdog7, post: 8730651, member: 681686"] When I installed my after market HU (using a PAC harness), the directions had me connecting 4 blue and blue/white wires together (see image below). The 2 blue wires appear to relate to the antenna and the two blue/white wires to the amp turn on. So now that I want to install the sub, I have ZERO idea how to make the remote on connection. I figure there are about four possibilities: -tie the blue wire from the powered sub to this entire bundle (so five wires together) -tie the blue wire from the powered sub to the blue/white from the Sony HU -tie the blue wire from the powered sub to the blue/white from the PAC -tie the blue wire from the powered sub both blue/whites (from the PAC and the Sony HU) In all cases, I imagine the remaining wires would be bundled together. Does anyone have any idea how this is supposed to work? Thanks. [ATTACH type="full" alt="25873"]25873[/ATTACH] [/QUOTE]

Verification