Reply to thread

Message

<blockquote data-quote="L1ttlet" data-source="post: 8765789" data-attributes="member: 675617">HELP WITH CLIPPING. I am running an sfb 5000.1 and a sfb 500.4. an audio control lcq-1 and stock headunit on a 2020 toyota 4runner.subs are wolfram ag10&quot; 2 of those running 3200watts rms @1ohmactive wolfram 6.5 mids and 250watts rms @2ohms. 4 of them 2 on each channel number 3 and 4active wolfram tweeters at 250watts rms @ 2ohms. 4 of them 2 on each channel 1 and 2.I SET EVERYTHING WITH A DMM. digital multimeterI went through and set the headunit to flat and then the lcq-1 flat. turned the volume up to 55 out of a 63.&nbsp;set channel 1and2 on lcq-1 @3khertz -3db at between 4 8-5volts. with dmmset channel 3and4 on lcq-1 @1khertz -3db at between 4.8-5volts. with dmmset the bass amp on lcq-1 @40hertz -3db at between 4.8-5volts. with dmmset sfb 500.4 with dmm on channels 1 and 2 @ 250watts rms at 2 ohms on volume 55 then the same for channel 3 and 4 the exact same way.set the sfb5000.1 with dmm @3200watts rms @1ohms on volume 55. with same crossover frequencies as lcq-1started playing music and my amps start clipping at volume 30 for bass amp and volume 20 on the sfb 500.4. with same frequency as lcq-1why am I clipping? crossover points maybe? or is the lcq-1 outputting more than 5volts on channel 1-2?</blockquote>

[QUOTE="L1ttlet, post: 8765789, member: 675617"] HELP WITH CLIPPING. I am running an sfb 5000.1 and a sfb 500.4. an audio control lcq-1 and stock headunit on a 2020 toyota 4runner. subs are wolfram ag10" 2 of those running 3200watts rms @1ohm active wolfram 6.5 mids and 250watts rms @2ohms. 4 of them 2 on each channel number 3 and 4 active wolfram tweeters at 250watts rms @ 2ohms. 4 of them 2 on each channel 1 and 2. I SET EVERYTHING WITH A DMM. digital multimeter I went through and set the headunit to flat and then the lcq-1 flat. turned the volume up to 55 out of a 63. set channel 1and2 on lcq-1 @3khertz -3db at between 4 8-5volts. with dmm set channel 3and4 on lcq-1 @1khertz -3db at between 4.8-5volts. with dmm set the bass amp on lcq-1 @40hertz -3db at between 4.8-5volts. with dmm set sfb 500.4 with dmm on channels 1 and 2 @ 250watts rms at 2 ohms on volume 55 then the same for channel 3 and 4 the exact same way. set the sfb5000.1 with dmm @3200watts rms @1ohms on volume 55. with same crossover frequencies as lcq-1 started playing music and my amps start clipping at volume 30 for bass amp and volume 20 on the sfb 500.4. with same frequency as lcq-1 why am I clipping? crossover points maybe? or is the lcq-1 outputting more than 5volts on channel 1-2? [/QUOTE]

Verification