First I have two 12" Pioneer TS-W303C Subwoofers. They are in perfect shape mechanically, and a 9.5/10 cosmetically. Only reason I say that is because one of the words is starting to come off the magnet boot.
Diamondplate Foamed IMPP (Injection Molded Polypropylene) Rigilite™ Composite Cone Woofer (Titanium Grey)
One-Piece Cone Construction for Reduced Distortion
Dual-Layer Urethane Surround
Direct-to-Cone Voice Coil Mounting Ring
Conex Damper with Damper Ring
Lead Wires Integrated into Damper for High Reliability and Improved Power Transfer
Oversized Glass-Imide Voice Coil Bobbin
Projected Pole Yoke with Vented Pole
High-Energy Strontium Magnet with Bumped Back Plate
Low-Q Design for use in Small Sealed Box (1.5 cubic foot recommended)
500 Watts Max Music Power
160 Watts Nominal Power Handling
Frequency Response: 18-2,000Hz
Sensitivity (Efficiency): 93dB (1W/1m)
4 Ohm
Next I have 2 15" Pyle Blue Wave Subwoofers. They are 10/10 mechanically, and 9/10 cosmetically.
Output Power 1400W (PMPO)
Dual 4 Ohm
Additional Information Blue Injection Molded Cone
Specially Treated Rubber Edge Suspension
Bumped & Vented Pole Piece
Silver Plated Terminal
Flat Progressive Spider
New Wave-Like Rubber Gasket
Rubber Magnet Boot
2.5'''' High Temperature Dual Kapton Voice Coil
Mounting Depth: 8''''
Next I have an AudioControl EQL Series 2. Its in perfect working condition. Only flaw is a couple minor scratches. Other than that its perfect.
Trunk Mount Equalizer and Pre-amp
6 Band, 1/2 Octave Bass EQ
7 Band, 1 Octave Equalizer
Programmable Frequency Match (PFM) Subsonic Filter
Line and Speaker Level Inputs
Balanced Inputs
Input and Output Level Matching Controls
Lastly I have two 5.25" Kicker RS5 mids for sale. 10/10 all around.
90 Watt RMS Peak Power Handling: 180 Watt Frequency Response: 50 Hz - 22 kHz Sensitivity 87 dB
25+shipping each for the Pyle's, or 40+shipping for both.
30+shipping for each of the Pioneer's, or 50+shipping for both
80 shipped for the AudioControl
50+shipping for the Kicker mids
Diamondplate Foamed IMPP (Injection Molded Polypropylene) Rigilite™ Composite Cone Woofer (Titanium Grey)
One-Piece Cone Construction for Reduced Distortion
Dual-Layer Urethane Surround
Direct-to-Cone Voice Coil Mounting Ring
Conex Damper with Damper Ring
Lead Wires Integrated into Damper for High Reliability and Improved Power Transfer
Oversized Glass-Imide Voice Coil Bobbin
Projected Pole Yoke with Vented Pole
High-Energy Strontium Magnet with Bumped Back Plate
Low-Q Design for use in Small Sealed Box (1.5 cubic foot recommended)
500 Watts Max Music Power
160 Watts Nominal Power Handling
Frequency Response: 18-2,000Hz
Sensitivity (Efficiency): 93dB (1W/1m)
4 Ohm
Next I have 2 15" Pyle Blue Wave Subwoofers. They are 10/10 mechanically, and 9/10 cosmetically.
Output Power 1400W (PMPO)
Dual 4 Ohm
Additional Information Blue Injection Molded Cone
Specially Treated Rubber Edge Suspension
Bumped & Vented Pole Piece
Silver Plated Terminal
Flat Progressive Spider
New Wave-Like Rubber Gasket
Rubber Magnet Boot
2.5'''' High Temperature Dual Kapton Voice Coil
Mounting Depth: 8''''
Next I have an AudioControl EQL Series 2. Its in perfect working condition. Only flaw is a couple minor scratches. Other than that its perfect.
Trunk Mount Equalizer and Pre-amp
6 Band, 1/2 Octave Bass EQ
7 Band, 1 Octave Equalizer
Programmable Frequency Match (PFM) Subsonic Filter
Line and Speaker Level Inputs
Balanced Inputs
Input and Output Level Matching Controls
Lastly I have two 5.25" Kicker RS5 mids for sale. 10/10 all around.
90 Watt RMS Peak Power Handling: 180 Watt Frequency Response: 50 Hz - 22 kHz Sensitivity 87 dB
25+shipping each for the Pyle's, or 40+shipping for both.
30+shipping for each of the Pioneer's, or 50+shipping for both
80 shipped for the AudioControl
50+shipping for the Kicker mids
