Reply to thread

Message

<blockquote data-quote="lo_ud" data-source="post: 4571171" data-attributes="member: 581275">This amp is a DUAL mono block SUPER D......it has 2 D class amps straped inside to start. The rateing is 3.2K@2homs OR 1.6K@1 ohm X2.The amp protects at 1.6ohms bridged IF you can feed it power....1.9 with MOST eletric systems....higher ohm IF you are short on power.I have tested the CRAP out of these things at about EVERY ohm load you could think of. I have YET to see the amp be able to carry a LOW ohm load, the power IS there BUT above 2 ohms. From MY own testing AND others testing(that I know) the common agrment is IF...IF..IF you COULD get it to carry a 2.1-2.3 REACTIVE ohm load it would do it&#039;s FULL power. BUT the amp is VERY hard to get below 3 ohm&#039;s......it&#039;s like it&#039;s 3+ OR protect at 1.6ISH. The amps just dn&#039;t find a happy medium in the 2&#039;s. I have burped this amp BELOW .7 BUT my rise was HUGE, don&#039;t try that at home KIDS.I DO know that the amp don&#039;t like to up the amps much over 32 and voltage over 100...out put&nbsp; of course. That was with a REAL stiff eletric system....voltage droped around 13.9 BUT it took OVER 400 amps draw to do that AND was NOT able to be held very long. This amp just seems to be happy with 2.4-2.8K RMS . It has more BUT it is hard to get out of it.I&#039;m sure if the stars algn and the wind was right it COULD do almost 4K on say 16 Volts.......as I DO KNOW they work MUCH better at higher input voltage.</blockquote>

[QUOTE="lo_ud, post: 4571171, member: 581275"] This amp is a DUAL mono block SUPER D......it has 2 D class amps straped inside to start. The rateing is 3.2K@2homs OR 1.6K@1 ohm X2. The amp protects at 1.6ohms bridged IF you can feed it power....1.9 with MOST eletric systems....higher ohm IF you are short on power. I have tested the CRAP out of these things at about EVERY ohm load you could think of. I have YET to see the amp be able to carry a LOW ohm load, the power IS there BUT above 2 ohms. From MY own testing AND others testing(that I know) the common agrment is IF...IF..IF you COULD get it to carry a 2.1-2.3 REACTIVE ohm load it would do it's FULL power. BUT the amp is VERY hard to get below 3 ohm's......it's like it's 3+ OR protect at 1.6ISH. The amps just dn't find a happy medium in the 2's. I have burped this amp BELOW .7 BUT my rise was HUGE, don't try that at home KIDS. I DO know that the amp don't like to up the amps much over 32 and voltage over 100...out put of course. That was with a REAL stiff eletric system....voltage droped around 13.9 BUT it took OVER 400 amps draw to do that AND was NOT able to be held very long. This amp just seems to be happy with 2.4-2.8K RMS . It has more BUT it is hard to get out of it. I'm sure if the stars algn and the wind was right it COULD do almost 4K on say 16 Volts.......as I DO KNOW they work MUCH better at higher input voltage. [/QUOTE]

Verification