Reply to thread

Message: <blockquote data-quote="n2audio" data-source="post: 6969256" data-attributes="member: 540940">sub + port displ. I have at 1.41, not sure what your braces displace but if your net volume is 12.0 you should be real close to 35.Looking at the port air velocity plot at rated power (2400w) it looks to me like you're going to have some noise as you approach 40hz and will get worse below that.  Down around 1/2 power (-3dB) port noise should be minimal at worst.I'm guessing SQ is not a premium so some port noise at/near full volume probably won't be an issue so my guess is what you have planned will work fine.</blockquote>

Top