Reply to thread

Message: <blockquote data-quote="mrray13" data-source="post: 855168" data-attributes="member: 540942">u've got approximetely 1.18ft^3 after sub and port displacment.....assuming 3/4" mdf, schedule 40 PVC and a sub displacment of .05ft^3..if the sub is larger, then u've got even less volume...but for most tens, that should be plenty..the cvr should do just fine in there...however, with the smaller volume (if u used 1.28ft^3 to figure tuning), ur tuning will be a bit higher...probably in the 36hz range..not enough to matter...wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee :slayer:</blockquote>

Top