Reply to thread

Message: <blockquote data-quote="JEXTEL" data-source="post: 4261126" data-attributes="member: 573249"><p>Well i have bought a Iraggi Alternator (220amp) about 2 weeks ago installed it everything worked fine until today i was listening to music and notice a burning smell(not amps or subs) like tires burning  so I cut everythng off and pulled over after looking at my car and everything i notice my volts were only at 12v then i rev the engine alittle and it went  to 12.2v before it would be about 14.2 then idle around 13.6-13.7..I was going to upgrade the wires some more today once i got paid because my big 3 is done in 4 gauge and my wires going to the second battery is 1/0 gauge. I was going to add 1/0 to the big there and do another run of 1/0 until i can get some more money..I check all the grounds and amps and everything seems fine but for some reason my volts are at 12v only..what happened? I didnt blow and fuses i check them too..</p></blockquote><p></p>

Top