I have a lot of stuff going on sale soon and this is probably just an interest thread. If anyone wants any of this bad enough shoot an email to GCAdidas13 (at) Columbus.rr [dot] com.
CDT HD 6 Component Set
This is a set of CDT's HD series component set. As of right now, this component set is my favorite component set. It sounds much more natural than the DLS UR6 set that I had, as well as the MB Quart RCE series that I had as well. I had these installed in 0.25 cubes sealed kick panels, directed toward the opposite listener's head. The tweeters I only layed on the dash. You won't find very many bad reviews of this component set. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif I bought them only about four or five months ago, and i installed them once, and the whole set is in perfect condition. I dont have any pictures for now but I will take some on demand.
Adire Audio Koda 8
Yes this is the awesome Adire Audio Koda 8. They were the last two drivers I know of that were bought in brand new condition. I got the last one from DIYAudio.com and then DIYAudio did an order from Adire for the last koda - the one that they did a few tests with to get the Frequency Response curves. The Koda 8 makes an awesome midbass driver as it is flat from 60 to 200 hz in an enclosure of 0.35 cubes sealed. I bought these about eight or nine months ago and only installed them into my car once for a few days, and they have been sitting in my room ever since. I never finished my installation because I totalled my car, and now i'm going with a whole new setup, so I dont need it anymore. Both drivers are in perfect condition.
Phoenix Gold 15-Band Equalizer and Crossover
I bought this used about 8 or 9 months ago. It was in decent condition when it got to me, and it is in the same condition as it was when i got it. I never installed it permanently, it was wired for about 3 weeks and then I took it back out. It too was waiting for the final installation which I never got to. It has 15 bands of equalization and it is stereo, and also serves as a crossover from i believe 30-600 hertz. It also features an auxiliary input. It has a mark on it, and one of the bands is partly broken but still operable.
Fiberglass Enclosures for a 1995 Toyota Camry
These boxes were created by my hand in my garage, with a lot of time in labor and also a lot of money in materials.
First the kick panels: They were made to fit perfectly in place of the stock kick panels of a 1995 Toyota Camry LE 4-door, serving both as speaker enclosures and also holds back all of the wiring that goes into the door. It also slides underneath the door's lower trim. The kick panels will house a 6.5" driver and are roughly 0.25 cubes sealed. They are painted with Truck Bed Lining - the finish is rough and very durable, and easy to clean. There are very few imperfections, if any.
The door pods I do not expect to sell, but I am offering them all the same. They are 0.35 cubes sealed, and they mount directly to the door. The door panels must be cut for these to fit. They house an 8" driver and are painted the same as the kick panel enclosures.
Here are pictures of everything.
That's all... if you'd like more pictures just ask and i'll take a few for you.
Brian
CDT HD 6 Component Set
This is a set of CDT's HD series component set. As of right now, this component set is my favorite component set. It sounds much more natural than the DLS UR6 set that I had, as well as the MB Quart RCE series that I had as well. I had these installed in 0.25 cubes sealed kick panels, directed toward the opposite listener's head. The tweeters I only layed on the dash. You won't find very many bad reviews of this component set. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif I bought them only about four or five months ago, and i installed them once, and the whole set is in perfect condition. I dont have any pictures for now but I will take some on demand.
Adire Audio Koda 8
Yes this is the awesome Adire Audio Koda 8. They were the last two drivers I know of that were bought in brand new condition. I got the last one from DIYAudio.com and then DIYAudio did an order from Adire for the last koda - the one that they did a few tests with to get the Frequency Response curves. The Koda 8 makes an awesome midbass driver as it is flat from 60 to 200 hz in an enclosure of 0.35 cubes sealed. I bought these about eight or nine months ago and only installed them into my car once for a few days, and they have been sitting in my room ever since. I never finished my installation because I totalled my car, and now i'm going with a whole new setup, so I dont need it anymore. Both drivers are in perfect condition.
Phoenix Gold 15-Band Equalizer and Crossover
I bought this used about 8 or 9 months ago. It was in decent condition when it got to me, and it is in the same condition as it was when i got it. I never installed it permanently, it was wired for about 3 weeks and then I took it back out. It too was waiting for the final installation which I never got to. It has 15 bands of equalization and it is stereo, and also serves as a crossover from i believe 30-600 hertz. It also features an auxiliary input. It has a mark on it, and one of the bands is partly broken but still operable.
Fiberglass Enclosures for a 1995 Toyota Camry
These boxes were created by my hand in my garage, with a lot of time in labor and also a lot of money in materials.
First the kick panels: They were made to fit perfectly in place of the stock kick panels of a 1995 Toyota Camry LE 4-door, serving both as speaker enclosures and also holds back all of the wiring that goes into the door. It also slides underneath the door's lower trim. The kick panels will house a 6.5" driver and are roughly 0.25 cubes sealed. They are painted with Truck Bed Lining - the finish is rough and very durable, and easy to clean. There are very few imperfections, if any.
The door pods I do not expect to sell, but I am offering them all the same. They are 0.35 cubes sealed, and they mount directly to the door. The door panels must be cut for these to fit. They house an 8" driver and are painted the same as the kick panel enclosures.
Here are pictures of everything.
That's all... if you'd like more pictures just ask and i'll take a few for you.
Brian
