Reply to thread

Message

<blockquote data-quote="NSTALN" data-source="post: 8559821" data-attributes="member: 588169">Yeah I was thinking that as well...I have been eye-balling the GS 6x9 mid that is s&#039;posed to be designed to mate with the GS10...I do have GB25&#039;s and the GB2510c passives to go along with them...that would mean potentially a 3-way front (active midbass to midrange, passive between the midrange and tweet)...then the coaxs rear and center.The problem with adding the GB25&#039;s into the mix is where to put them...Running a 5.1 I&#039;ve read that I&#039;ll want to have them (mids and tweets) high in the door panels to widen the sound stage and reinforce the center speaker. This means going with pods of some sort or finding some real estate on the door panels...hmmmm.I do have room in my upper door panel for the mids...however the tweets my have to go in the pilar.....they may be about 1ft apart...which isn&#039;t ideal. The GB25&#039;s would be just above knee height on the door and on-axis with the midbass drivers.</blockquote>

[QUOTE="NSTALN, post: 8559821, member: 588169"] Yeah I was thinking that as well...I have been eye-balling the GS 6x9 mid that is s'posed to be designed to mate with the GS10...I do have GB25's and the GB2510c passives to go along with them...that would mean potentially a 3-way front (active midbass to midrange, passive between the midrange and tweet)...then the coaxs rear and center. The problem with adding the GB25's into the mix is where to put them...Running a 5.1 I've read that I'll want to have them (mids and tweets) high in the door panels to widen the sound stage and reinforce the center speaker. This means going with pods of some sort or finding some real estate on the door panels...hmmmm. I do have room in my upper door panel for the mids...however the tweets my have to go in the pilar.....they may be about 1ft apart...which isn't ideal. The GB25's would be just above knee height on the door and on-axis with the midbass drivers. [/QUOTE]

Verification