Reply to thread

Message

<blockquote data-quote="MellowHype" data-source="post: 8341749" data-attributes="member: 640052">Wil check that out, thanksYeah i did my aero with a heat gun and metal bowl, but it seems that once its in the box thats it. the coupler i used to connect the two peices is really a one use thing, the seam on the inside will split if i keep removing and replacing + its a right bastard to get on and off.I just went out and drove around for 10 mins with a few different songs on full, im convinced that my R&#039;s even on 500 each should be much louder. I was thinking of making a video to show you guys but i know bass doesnt pick up too well on camera.I found a welding supplies store on ebay with 50mm cable for a reasonable price, with terminals also. i believe thats a few mm smaller than real 1/0 gauge wire, so i might try the big three with that.I set my gains using a DMM before and i just feel that i could be getting a lot more out of my amp, but the meter was set to the correct voltage playing a -3db 40hz tone.So frustrating after all this money and it seems i have very little performance to show for it, the only thing ive been 100% satisfied with is the deckEdit: i also went 2 clicks higher than my max (27-35) for just a few seconds and didnt notice any distortion, not sure if that means anything</blockquote>

[QUOTE="MellowHype, post: 8341749, member: 640052"] Wil check that out, thanks Yeah i did my aero with a heat gun and metal bowl, but it seems that once its in the box thats it. the coupler i used to connect the two peices is really a one use thing, the seam on the inside will split if i keep removing and replacing + its a right bastard to get on and off. I just went out and drove around for 10 mins with a few different songs on full, im convinced that my R's even on 500 each should be much louder. I was thinking of making a video to show you guys but i know bass doesnt pick up too well on camera. I found a welding supplies store on ebay with 50mm cable for a reasonable price, with terminals also. i believe thats a few mm smaller than real 1/0 gauge wire, so i might try the big three with that. I set my gains using a DMM before and i just feel that i could be getting a lot more out of my amp, but the meter was set to the correct voltage playing a -3db 40hz tone. So frustrating after all this money and it seems i have very little performance to show for it, the only thing ive been 100% satisfied with is the deck Edit: i also went 2 clicks higher than my max (27-35) for just a few seconds and didnt notice any distortion, not sure if that means anything [/QUOTE]

Verification