Reply to thread

Message

<blockquote data-quote="jasperpso" data-source="post: 1908226" data-attributes="member: 568842">well i am running 2 12in assassins in a prefab box for a 97 ram x-cab made by kruzin audio.. and it sounds ok, dont get me wrong.. but i dont believe the specs listed by the manufacturer that the box is 1.2 cuft per chamber... i did the math and it just isnt so..&nbsp;&nbsp; so today, off to lowes i went and bought a 4X8 sheet of 3/4 mdf and came home to build something &#039;better&#039;i am almost done with it.&nbsp; using this prefab box as a outline of what will fit in the underseat area.. i took its footprint and enlarged it a little were it could be and elimintated some dead space in the original design, and i have enlarged the original design by nearly .5 cuft per side.. close as i can figuer it, it is nearly 1.15 cu ft per side now..&nbsp;&nbsp; i also set it up so the subs fire downward toward the floor instead of forward toward front seats..like i said i am almost done with it, should be able to give it a whirl tomorrow..&nbsp; luckily enough UPS tracking page says my PG x600.1 will be here tomorrow, so i will get it installed too.&nbsp; i will post pics asap..finally my questions!&nbsp; what type of filler&nbsp; (and how much) should be used inside the box chambers?&nbsp; also, did i do a wise thing making the subs fire toward the floor?thanks for any info guys..jasper</blockquote>

[QUOTE="jasperpso, post: 1908226, member: 568842"] well i am running 2 12in assassins in a prefab box for a 97 ram x-cab made by kruzin audio.. and it sounds ok, dont get me wrong.. but i dont believe the specs listed by the manufacturer that the box is 1.2 cuft per chamber... i did the math and it just isnt so.. so today, off to lowes i went and bought a 4X8 sheet of 3/4 mdf and came home to build something 'better' i am almost done with it. using this prefab box as a outline of what will fit in the underseat area.. i took its footprint and enlarged it a little were it could be and elimintated some dead space in the original design, and i have enlarged the original design by nearly .5 cuft per side.. close as i can figuer it, it is nearly 1.15 cu ft per side now.. i also set it up so the subs fire downward toward the floor instead of forward toward front seats.. like i said i am almost done with it, should be able to give it a whirl tomorrow.. luckily enough UPS tracking page says my PG x600.1 will be here tomorrow, so i will get it installed too. i will post pics asap.. finally my questions! what type of filler (and how much) should be used inside the box chambers? also, did i do a wise thing making the subs fire toward the floor? thanks for any info guys.. jasper [/QUOTE]

Verification