Reply to thread

Message: <blockquote data-quote="vario" data-source="post: 3697344" data-attributes="member: 583966"><p>ok, so this box is 1x3x1 so it is 3 cu ft. volume.  I am not sure how to make the port so that it is tuned for 28-30hz.  Right now I just made a slot that is 9 inches long into the box and then 3 inches hooking inwards just as a mockup but I am not sure how to calculate how this slot should be.</p></blockquote><p></p>

Verification

Top

Menu