Reply to thread

Message: <blockquote data-quote="keep_hope_alive" data-source="post: 7833867" data-attributes="member: 576029">note with that table saw that the extensions might not be the exact same size as the main table.  that is a concern when the guide overlaps the seam, then the guide can lose true perpendicular and you can get  binding at the blade.  it can be a PITA to cut some dimensions.  the best thing to do is laminate a later on the extensions so they are the same size as the main table (usually they are a bit smalller) so the guide can overlap the seam and remain true.cool box.</blockquote>

Top