Reply to thread

Message: <blockquote data-quote="thch" data-source="post: 2738329" data-attributes="member: 562032">You can easily test things out by removing an input to the amp while the amp is playing.  in a bridged configuration the amp will work with only one of the two channels receiving a signal, but the issue is that the second channel would not contribute anything and would just serve to reduce performance.thus if you plugged the same signal into, say channel 1 &amp; 2 and played some music/tones, you would notice a drop in volume if you were to suddenly pull the signal from channel 2.so if you really want answers, you could just try it out.</blockquote>

Top