Sold Brand new TC OEM 10 and PR

PolishDude
10+ year member

Member
Rating: 0%
0 0 0
TC Sounds OEM 10 and Passive Radiator

I have these but never used them. Just took them out of the packaging to look at them. They have never been hooked up or installed. The plastic bolt on the passive radiator is uncut. I am selling both together for $250 shipped.

More info on it:

TC Sounds is offering an OEM 10″ driver for a limited time after the success of the recent OEM 12″ sale. The TC10 OEM driver uses a TC-2000 voice coil and a TC9 motor.

Features:

- Lightweight Honeycomb glass fiber cone

- 1″ tall NBR surround

- 28mm xmax

- 190 ounce motor

- 800 watts RMS

- 3″ wide, long-wind AL voice coil

- Dual 8.5″ spiders with woven leads

- Single 4 ohm DCR or Dual 4 ohm DCR

- Actual weight: 29.5 pounds

- *NOTE: Actual drivers have BLACK frames (not silver)

Specs:

- Qts 0.357

- Qes 0.400

- Qms 3.35

- Fs 30Hz

- Res 3.11 ohms

- Ls 4.0 mH

- Lp 6.26 mH

- Rp 9.9 ohms

- Dia 208mm

- Vas 19.3 liters

- Mms 224 grams

- Cms 119 um/N

- BL 18.35Tm

- Spl 83.3dB

Enclosure Recoomendations:

- Small Sealed: 0.3 cubic feet

- Large Sealed 0.6 cubic feet

- Ported: 0.5-0.6 cubic feet with a single 10″ or 12″ PR

tc10-oemb.jpg


ill take some pics of the ones actually for sale tonight, right now i am at work. you can find my buyer feedback on ebay, my name is polishdude1 on there.

Id like to try these things out but i am not willing to give up the space in my 08 vette:)

I am also looking for a new IDQ v3d4

 
Also i am open to trades, but due to my car and what i am going for, the things i am looking for specifically are

2 re re8s or something comprable

eclipse xa4000 4 channel amp or something comprable

 
it makes the small box act like a ported box, you can tune it to specific frequencies (by adding weight to it, that is whats in the brown box) just like a ported box, my knowledge is pretty limited on it but it gives you the advantages of a ported box but allows you to make the box small (.6 airspace) as well as change the tuning frequency by just adding or subtracting weight rather then rebuilding a box each time.
Yep, thats rigiht, but general rule of thumb is twice the cone area of the PR for the sub. For example: If you have a 15" sub, you would either want 4 12" PR's or 2 15" PR's.

 
What prices are we talking?
what do you mean?

price for what i am selling is $250 shipped

as far as the stuff i am looking for, it depends what sort of condition it is in. I can get two re re8s on ebay for just under $120 shipped and a xa4000 for about $180 shipped, those are new.

 
Yep, thats rigiht, but general rule of thumb is twice the cone area of the PR for the sub. For example: If you have a 15" sub, you would either want 4 12" PR's or 2 15" PR's.
yup, thats why tc specifically designed this PR to be used in conjunction with this sub, so you would only need one, normally what you said is the case though, i remember reading that too.//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
yeah ill split them, but want to find buyers for both first, i do think it would be easier to sell just the sub then the passive though, so how much are you looking to spend? i noticed you are in Hi, so shipping may be a bit expensive

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

PolishDude

10+ year member
Member
Thread starter
PolishDude
Joined
Location
Tampa, Fl
Start date
Participants
Who Replied
Replies
77
Views
4,012
Last reply date
Last reply from
trevor87
design.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0
IMG_2118.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0

New threads

Top