Sold Brand New Mopar Dodge Dakota/Durango/Ram 3.9/5.9L 1999-2003 160A Alternator

WiCKeD 5.9L
10+ year member

Senior VIP Member
Rating: 0%
0 0 0
$200 shipped (retails for $280+ shipped + tax from the dealer)

Why settle for eBay alts that make no power at idle? Get the real deal!!!

Denso-branded/Mopar boxed. Bought this from a dealer, hoping to use this in a ’98 Jeep Grand Cherokee. Unfortunately, it turns out Chrysler changed the electrical connection on the back of ‘99+ alternators and the dealership will not let me return electrical components.

Please make sure this fits your vehicle, as there is a chance I am wrong about the models. I compared to pics online, but those could be wrong. I also believe this will fit the newer XJ’s (Jeep Cherokee '00+), but you would need to swap out your old 6-groove pulley.

2001durangoalternatortu5.jpg


2001durangoalternatorbawn9.jpg


$400 shipped - 2 x 6 1/2" Diamond Audio component sets

DiamondHEXes.jpg


First set is S600S with the silk tweeters - Good condition, about 1 3/4 years of use, tweeter surface mounting brackets are cracked, but still usable. Flush mounts also included.

Second set is S600A with aluminum dome tweeters - Good condition, about 1/3/4 years of use on woofers, less than a month on tweeters, crossovers are from a HEX S500 set, power connectors on woofers will be rethreaded, tweeter surface mounting brackets are cracked, but still usable. Flush mounts also included.

Silk tweeters are quite possibly better than Rainbow Germs and far better than any of the Best Buy $200-300 sets out there. The aluminum tweeters were used previously so I never had a chance to compare them. The silk tweeters are pure honey so I never bothered! The second set was purchased for the rearfill.

Plenty of references under Heatware: WiCKeD001 / eBay: sleepeeg3 Feel free to e-mail me through either of these for confirmation!

 
dude all you have to do is get the plug for the feild wires, the computer controls the voltage, the feild wires polarity doesnt matter, that denso alt is ont ALOT of chrysler cars, they just change the plug for the feild wires, the posotive is well a posotive, run a 1/0 wire from that to the batt if you want, the plug you need is a 5019925aa, I am installing one on my 90 Daytona, I have been working at Chrysler dealerships for 9 years, lets just say I have done a little research, I tried to tell you this in a previous post but it got deleted by gay mods, I hate to see you waste your money

 
yes that plug will fit any of the newer jeep gc's up to 05-06 somewhere in there but defenitly 99-02 just put a new style small case on my 00 jeep and it bolted up exact with the same plug.also found out you can run an external regulator on them too!!!!

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

WiCKeD 5.9L

10+ year member
Senior VIP Member
Thread starter
WiCKeD 5.9L
Joined
Location
San Clemente, CA
Start date
Participants
Who Replied
Replies
41
Views
2,531
Last reply date
Last reply from
WiCKeD 5.9L
IMG_1882.jpeg

slater

    Oct 4, 2025
  • 0
  • 0
Screenshot_20251004_120904_Photo Translator.jpg

1aespinoza

    Oct 4, 2025
  • 0
  • 0

New threads

Top