Reply to thread

Message

<blockquote data-quote="Zilla the Hun" data-source="post: 8804863" data-attributes="member: 686441">so you&#039;re saying i should face the subs towards the back of the car? i was always under the impression to face them forward and put the seats down if possible but i don&#039;t know much about car audio other than i need it in my life.i do have the subs already and i do regret not getting 10smy trunk grows in size the further it gets away from the seat. once i get past the wheel wells which is about 16 inches away from the seat it&#039;s roughly 48 inches the height grows as well so i could certainly make a bigger box that isn&#039;t just a rectangle. i just have no idea based off the t/s specs how much internal volume i need or how big to make a slotted port or how longdoes having 2 subs in 1 ported box make the suggested port size double?i also found this. would everything double in size for 2 speakers?internal net volume 1.75cu ft to 3.5?port area 18&quot;sq to 36&quot;sq?port length 19&quot; to 38&quot;?and the displacements?[ATTACH=full]41615[/ATTACH]sorry for my noobaliciousness</blockquote>

[QUOTE="Zilla the Hun, post: 8804863, member: 686441"] so you're saying i should face the subs towards the back of the car? i was always under the impression to face them forward and put the seats down if possible but i don't know much about car audio other than i need it in my life. i do have the subs already and i do regret not getting 10s my trunk grows in size the further it gets away from the seat. once i get past the wheel wells which is about 16 inches away from the seat it's roughly 48 inches the height grows as well so i could certainly make a bigger box that isn't just a rectangle. i just have no idea based off the t/s specs how much internal volume i need or how big to make a slotted port or how long does having 2 subs in 1 ported box make the suggested port size double? i also found this. would everything double in size for 2 speakers? internal net volume 1.75cu ft to 3.5? port area 18"sq to 36"sq? port length 19" to 38"? and the displacements? [ATTACH type="full" alt="41615"]41615[/ATTACH] sorry for my noobaliciousness [/QUOTE]

Verification