Reply to thread

Message

<blockquote data-quote="bobby_7" data-source="post: 1880661" data-attributes="member: 559314">so i finally got my wood cut for my box, i only made one bad cut, and its a little bit less than a 1/4 off (started to cut with a circular saw and realized that wasnt gonna work, then ran outta wood). im gonna have to fudge that, but it will be ok, im gonna throw some shims in there and seal it up like crazy with silicone. good enough for me. im using gorilla glue for this, so we will see how it works, i was gonna get titebond but they were out so i figured i&#039;d try it.now...i had orginally planned on building this box:<a href="http://h1.ripway.com/Bobby_7/BOX2.JPG" target="_blank">http://h1.ripway.com/Bobby_7/BOX2.JPG</a>but im trying to tune a little bit lower, so i added this:<a href="http://h1.ripway.com/Bobby_7/BOX3.JPG" target="_blank">http://h1.ripway.com/Bobby_7/BOX3.JPG</a>that last box should be tuned to like 29.95Hz. i need some checking on that. does it all look good? thanks</blockquote>

[QUOTE="bobby_7, post: 1880661, member: 559314"] so i finally got my wood cut for my box, i only made one bad cut, and its a little bit less than a 1/4 off (started to cut with a circular saw and realized that wasnt gonna work, then ran outta wood). im gonna have to fudge that, but it will be ok, im gonna throw some shims in there and seal it up like crazy with silicone. good enough for me. im using gorilla glue for this, so we will see how it works, i was gonna get titebond but they were out so i figured i'd try it. now...i had orginally planned on building this box: [URL="http://h1.ripway.com/Bobby_7/BOX2.JPG"]http://h1.ripway.com/Bobby_7/BOX2.JPG[/URL] but im trying to tune a little bit lower, so i added this: [URL="http://h1.ripway.com/Bobby_7/BOX3.JPG"]http://h1.ripway.com/Bobby_7/BOX3.JPG[/URL] that last box should be tuned to like 29.95Hz. i need some checking on that. does it all look good? thanks [/QUOTE]

Verification