Reply to thread

Message

<blockquote data-quote="Doxicity" data-source="post: 8362031" data-attributes="member: 665103">Hello, I&#039;m just taking the time to clarify with you guys that this box design will work, or anything that should be changed. First, some information on the setup.Vehicle: 2000 Infiniti G20Subs: x2 Sundown SA 15sI&#039;m building my own ported enclosure for this system, I already have all the tools to do so, I&#039;m almost ready to buy the materials and begin. The box dimensions (the whole box, not inside) are:Height: 18 inLength: 40 inDepth: 22 in7.54 ft^3For the port dimensions I was recommended to do:Height: 16.5 inWidth: 5.5 inLength: 20 in (is this how deep it is?)I&#039;m building it with 3/4 MDF. The subs and port are facing outward, and not upward.1. Do these size dimensions all sound/look good?2. Do I need some form of support inside the box?3. Should I face the port toward my trunk, or toward the hole that connects my trunk and back of car?Thanks, gotta run to class now.</blockquote>

[QUOTE="Doxicity, post: 8362031, member: 665103"] Hello, I'm just taking the time to clarify with you guys that this box design will work, or anything that should be changed. First, some information on the setup. Vehicle: 2000 Infiniti G20 Subs: x2 Sundown SA 15s I'm building my own ported enclosure for this system, I already have all the tools to do so, I'm almost ready to buy the materials and begin. The box dimensions (the whole box, not inside) are: Height: 18 in Length: 40 in Depth: 22 in 7.54 ft^3 For the port dimensions I was recommended to do: Height: 16.5 in Width: 5.5 in Length: 20 in (is this how deep it is?) I'm building it with 3/4 MDF. The subs and port are facing outward, and not upward. 1. Do these size dimensions all sound/look good? 2. Do I need some form of support inside the box? 3. Should I face the port toward my trunk, or toward the hole that connects my trunk and back of car? Thanks, gotta run to class now. [/QUOTE]

Verification