Reply to thread

Message: <blockquote data-quote="DonH" data-source="post: 6516131" data-attributes="member: 594322"><p>i use clamps for the most part and screws. the glue is the main bonding agent here. a good wood glue like titebond II or III will work fine bro. if you can only use clamps i suggest that you use alot of them as well as 90degree corner clamps. do not i repeat do not remove the corner clamps untill the bar clamps have been removed. and make sure you let the glue FULLY dry. i dont advise not using screws but you can do it</p></blockquote><p></p>

Top