Reply to thread

Message: <blockquote data-quote="audioholic" data-source="post: 6232300" data-attributes="member: 549629"><p>You are confused. My point was you keep saying its bad for the amplifier, its not. Its bad acoustically, but to an amplifier its 4ohms, no matter if its a single 4ohm SVC or 100 speakers wired up together to a final load of 4 ohms. You can have an SVC 4ohm speaker wired to one channel of your amp, while having two 8ohm speakers wired in parallel to the other channel. You are correct in that the SVC 4ohm will receive half the power, while the other two 8ohm units receive 1/4 of the power each. But you are incorrect that this is bad for the equipment.</p></blockquote><p></p>

Top