I lost interest in car audio years ago, so these have just been taking up space in my closet.
Hifonics Zeus ZX 1000
500Wx2 RMS @ 2ohm, 1000x1 @4
I think the only problem with this that it's picking up noise somewhere in the signal path.
Power Acoustic A3000DB
~2300 RMS @ 1ohm
I was planning on using this myself, so put a lot of work into fixing issues that amplifiers using this design usually have. It seems like I might have finished fixing it, but I don't remember and don't currently have an easy way of testing it, so selling as-is. If anything is blown, it will be the power supply MOSFETs.
Kicker ZX250.2
125x2 RMS @ 2 ohm, 250x1 @4
I think the supply MOSFETs are blown.
Kicker ZX1000.1
>1000 RMS @ 2 ohm
The supply MOSFETs were blown, and I don't remember if I replaced them already or not. As with the A3000DB, better to assume not.
Lanzar Opti 4x400D
180x4 @2 ohm
Again, blown supply MOSFETs.
I also have:
The correct power supply MOSFETs to repair these, as well as some extras.
A 300W 1.7 ohm test load
A 15' run of slightly oversized 1/0 welding cable, with connectors, an ANL fuse, and a short grounding run.
A bag of 25, 30, and 40A blade fuses.
I paid at least $600 for all this stuff in the same condition 3 or so years ago. I'd love to sell it all in one chunk, so make me a reasonable offer on the lot of it.
I don't have any itrader feedback, although I used to buy and sell stuff on here years ago. I'm orionismud on eBay, with 205 positive feedback. If you have enough positive feedback, I can ship before you pay.
Hifonics Zeus ZX 1000
500Wx2 RMS @ 2ohm, 1000x1 @4
I think the only problem with this that it's picking up noise somewhere in the signal path.
Power Acoustic A3000DB
~2300 RMS @ 1ohm
I was planning on using this myself, so put a lot of work into fixing issues that amplifiers using this design usually have. It seems like I might have finished fixing it, but I don't remember and don't currently have an easy way of testing it, so selling as-is. If anything is blown, it will be the power supply MOSFETs.
Kicker ZX250.2
125x2 RMS @ 2 ohm, 250x1 @4
I think the supply MOSFETs are blown.
Kicker ZX1000.1
>1000 RMS @ 2 ohm
The supply MOSFETs were blown, and I don't remember if I replaced them already or not. As with the A3000DB, better to assume not.
Lanzar Opti 4x400D
180x4 @2 ohm
Again, blown supply MOSFETs.
I also have:
The correct power supply MOSFETs to repair these, as well as some extras.
A 300W 1.7 ohm test load
A 15' run of slightly oversized 1/0 welding cable, with connectors, an ANL fuse, and a short grounding run.
A bag of 25, 30, and 40A blade fuses.
I paid at least $600 for all this stuff in the same condition 3 or so years ago. I'd love to sell it all in one chunk, so make me a reasonable offer on the lot of it.
I don't have any itrader feedback, although I used to buy and sell stuff on here years ago. I'm orionismud on eBay, with 205 positive feedback. If you have enough positive feedback, I can ship before you pay.
