Reply to thread

Message

<blockquote data-quote="ItalynStylion" data-source="post: 3142259" data-attributes="member: 568239">I&#039;ve been running two EU700&#039;s 6.5&quot; subs for a few months now and I think I just smoked one. The substage when attached to the amp will send it into a short protect but disconnected the amp (and everything else) works fine. I can feel the VC scraping on the motor structure when I push it in.Anyways, now that those are toast I&#039;m looking for a 6.5 sub replacement<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile&nbsp; &nbsp; :)" loading="lazy" data-shortname=":)" />Right now the box is 1cube, ported to mid 30&#039;s. What I&#039;m thinking I&#039;ll do is seal up the ports, cut two more holes, and run 4 tang band 6.5&#039;s. Each requires .25 of space sealed so that should work fairly well I think. The power I have to work with is 75x2@4; 150x2@2; or 300x1@4....I would imagine that I would run two in parallel off each channel so each of the 4 gets 75RMS.The questions I have are....1)How do you think this will compare to the ported ED setup I was running in terms of SPL and SQ2)What else should I be looking at in terms of 6.5 subs?</blockquote>

[QUOTE="ItalynStylion, post: 3142259, member: 568239"] I've been running two EU700's 6.5" subs for a few months now and I think I just smoked one. The substage when attached to the amp will send it into a short protect but disconnected the amp (and everything else) works fine. I can feel the VC scraping on the motor structure when I push it in. Anyways, now that those are toast I'm looking for a 6.5 sub replacement:) Right now the box is 1cube, ported to mid 30's. What I'm thinking I'll do is seal up the ports, cut two more holes, and run 4 tang band 6.5's. Each requires .25 of space sealed so that should work fairly well I think. The power I have to work with is 75x2@4; 150x2@2; or 300x1@4....I would imagine that I would run two in parallel off each channel so each of the 4 gets 75RMS. The questions I have are.... 1)How do you think this will compare to the ported ED setup I was running in terms of SPL and SQ 2)What else should I be looking at in terms of 6.5 subs? [/QUOTE]

Verification