Reply to thread

Message

<blockquote data-quote="ugadawg" data-source="post: 7229719" data-attributes="member: 630729">I&#039;ve tried to find the answers on here but I really don&#039;t know enough about these things to find an answer.I have a Rockford Fosgate P2002 (probably? It&#039;s definitely a P####) amp and a Infinity perfect 12 setup that I bought from a friend a pretty long time ago.&nbsp; For a while, the output from the sub has been in and out and when it does work, it usually goes into protect mode after a few minutes.&nbsp; It worked fine for a few years and randomly started after a few things happened.&nbsp; I&#039;m pretty sure I had a short in the wire connecting the sub to the amp which I replaced, the fuse in the line to the battery and it worked for a while and then started with the current problem.Is there an obvious problem with my set up such as wiring or settings?&nbsp; Try to keep the answers as basic as possible.&nbsp; Basically all I know is the sub is 4 ohm the gain and frequency settings aren&#039;t turned all the way up.&nbsp; Thanks for the help.</blockquote>

[QUOTE="ugadawg, post: 7229719, member: 630729"] I've tried to find the answers on here but I really don't know enough about these things to find an answer. I have a Rockford Fosgate P2002 (probably? It's definitely a P####) amp and a Infinity perfect 12 setup that I bought from a friend a pretty long time ago. For a while, the output from the sub has been in and out and when it does work, it usually goes into protect mode after a few minutes. It worked fine for a few years and randomly started after a few things happened. I'm pretty sure I had a short in the wire connecting the sub to the amp which I replaced, the fuse in the line to the battery and it worked for a while and then started with the current problem. Is there an obvious problem with my set up such as wiring or settings? Try to keep the answers as basic as possible. Basically all I know is the sub is 4 ohm the gain and frequency settings aren't turned all the way up. Thanks for the help. [/QUOTE]

Verification