Reply to thread

Message

<blockquote data-quote="mrfr3sh2def" data-source="post: 8359704" data-attributes="member: 664845">Hey Keep_hope_aliveI already went ahead and purchased 2 of the Orion 4002 today (new) for about $350 for the pair.&nbsp; Not to long after I made the purchase I found a new Orion 8002 along with a used Orion PHD 300 Control Panel to go along with it for approximately the same price give or take a few $.&nbsp; From your experience and the setup I mentioned above, what do you think would suit my build better?&nbsp; I could always send back the 2 4002s.&nbsp; Let me know what you think, I have no experience with either amps.&nbsp; I will also be taking your advice and just be running a set of components in a QLogic kick panel setup along with a fresh set of 6.5&#039;s in my door.&nbsp; (not sure yet about what to do w/ my 6x9s).&nbsp; Fyi - the main thing I want to do is make sure my mids/highs are not completely drowned out by all of the bass the xcons produce.Thanks in advance for any advice.Speakers Info:Orion 4002RMS Power Output:150 watts x 2 chan. @ 4 Ohms200 watts x 2 chan. @ 2 Ohms400 watts x 2 chan. @ 4 Ohms BridgedOrion 80022-Channel Amplifier200 watts x 2 chan. @ 4 Ohms400 watts x 2 chan. @ 2 Ohms800 watts x 1 chan. @ 4 Ohms (Bridged)</blockquote>

[QUOTE="mrfr3sh2def, post: 8359704, member: 664845"] Hey Keep_hope_alive I already went ahead and purchased 2 of the Orion 4002 today (new) for about $350 for the pair. Not to long after I made the purchase I found a new Orion 8002 along with a used Orion PHD 300 Control Panel to go along with it for approximately the same price give or take a few $. From your experience and the setup I mentioned above, what do you think would suit my build better? I could always send back the 2 4002s. Let me know what you think, I have no experience with either amps. I will also be taking your advice and just be running a set of components in a QLogic kick panel setup along with a fresh set of 6.5's in my door. (not sure yet about what to do w/ my 6x9s). Fyi - the main thing I want to do is make sure my mids/highs are not completely drowned out by all of the bass the xcons produce. Thanks in advance for any advice. Speakers Info: Orion 4002 RMS Power Output: 150 watts x 2 chan. @ 4 Ohms 200 watts x 2 chan. @ 2 Ohms 400 watts x 2 chan. @ 4 Ohms Bridged Orion 8002 2-Channel Amplifier 200 watts x 2 chan. @ 4 Ohms 400 watts x 2 chan. @ 2 Ohms 800 watts x 1 chan. @ 4 Ohms (Bridged) [/QUOTE]

Verification