Reply to thread

Message: <blockquote data-quote="los33" data-source="post: 8606684" data-attributes="member: 660834"><p>If you frame with 2x4 you could do 2 layers but 3/4 wood you can do 2 layers all around with 45's cut for edges.</p><p>This will guide most of the pressure towards the port with less impact on the walls.</p><p></p><p>Internal bracing is still needed specially on front baffle because of the sub motor force.</p><p></p><p>Sent from my Moto G (4) using Tapatalk</p></blockquote><p></p>

Verification

Top

Menu