Reply to thread

Message: <blockquote data-quote="CrossoverOre" data-source="post: 8185931" data-attributes="member: 642052"><p>i wouldnt think it would be the parking brake thats the problem.  I would check the settings in the deck and you can change the polarity for the camera to work from neg or pos trigger. Start with the setting first. what might be happening is its set to neg trigger which is where it rests at. and if you used the reverse wire and not acc to power the cam that will only power on in reverse.  make sure that the screen is not set to backup camera for the visual. finally try unplug the deck let sit for 10 min and see what you get.</p></blockquote><p></p>

Top