Sold Autotek MX3000.1, DC LVL 4 12s & more

[kingkongjr 10+ year member]

well, i figured ide put my setup fosale. lookin to try somthing new. any offers acceptable. just keep it to PMs. if anyone thinks the prices are unreasonable, let me know. had to borrow a camera from someone to take pics, so if you need any pics with my username lmk.

Autotek- 350$

750 Watts X 2 Channels @ 4 Ohms 1200 Watts X 2 Channels @ 2 Ohms

1500 Watts X 2 Channels @ 1 Ohm

3000 Watts X 1 Channel @ 2 Ohms Mono

New Class-X Digital Mono Switching Amplifiers w/DA Output Filter

0-18 dB Variable Bass EQ

Fully Adjustable Crossover 35Hz to 250Hz

24 dB Slope

Line Outputs

Subsonic Filter 20 to 50 Hz

4 AWG Molded Connectors

Maxi Fuse

Phone Jacks for Remote Control Operation. Adj. Bandpass X/Over-Function

24 dB Slope on Subsonic

couple minor scratches. did my best to get it to stand out as much as possible. i cleaned the amp 1/2 way, and yeahhhh you can tell how dusty this thing is //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif. ive read that this thing puts out 3500@2ohm, so its pretty underrated. 1,2 and 4 ohm stable.

DC sound lab level 4 12s D2 400$/pair.

only thing wrong with these beasts, is i had some trouble keeping the dustcaps on. came off twice, and then re-glued them with GOOP. No problems since. obviously you all know this doesnt effect a damn thing. some paper came off the cone.

Click to read more...

 

[kingkongjr 10+ year member]

MMAT 500.1 100+shipping

500 W RMS 1 Ohm Mono ;1000w-1200wmaxLeading edge technology

Efficiencies over 90%

4 AWG battery inputs

Optimized for low impedance loads

Dual MOSFET power supplies in the HC models

24db low pass Linkwitz-Riley infinitely variable filter

Frequency Response(-3db) 10Hz to 230Hz

Signal to Noise Ratio -92db A weighted

Distortion@Rated Output

Damping Factor@100Hz >125

Input Sensitivity 150mV to 2.5Vrms

Idle Current 1 amp

US AMPS USA-200 150$ (Pre buyout, 99')

crack in corner of plexi, very minor scratch on top.(see pic); will throw in a pair of memphis distros( 1 4g IN / 4 8g out ) OR pair of RCAs

2 x 100W @ 4 ohms2 x 200W @ 2 ohms

2 x 260W @ 1 ohm

1 x 520W @ 2 ohms bridged

Audio Art Crossover (old school) - 50$

 

[Ekimdude 10+ year member]

Nice mmats and us amps, good prices too.

 

[kingkongjr 10+ year member]

i still have my Kenwood excelon x791 too. basically mint, VERY FEW hairline scratches. mainly looking for trades for another HU, but will sell if i can find another hu quick enough.

i have everything that i comes iwth brand new.

also, i have the box made by TWISTED_0912 for the 2 DCs. 4 cubes, 33hz flush mounted, kerf'd port and custom DC logo on the back

 

[snb778 5,000+ posts]

no way! you have the same deck and amp as me!

can't believe someone else on here has an MX3000.1

I had Maxxonics repair mine... should have heard what the lady on the phone was sayin about it... all the techs love it, said to take great care of it cause its a one of a kinda from maxxonics

yours is in a hell lot better condition than mine though!! dam back plate came off mine!

 

[kingkongjr 10+ year member]

if anyone wants pics of the US working, i currently have it installed on a pair of 6x9s untill the weekend. let me know before then if youd like some 'proof' pics

 

[RidnClean 5,000+ posts]

**** when im broke.

i've been lookin for a MX3000 forever.

 

[kingkongjr 10+ year member]

up.

 

[jdmferio13 10+ year member]

what kind of hu you looking for

 

[nicksredline 10+ year member]

what the price on the box?

 

[kingkongjr 10+ year member]

PM'd the both of you

 

[thericanballer 10+ year member]

is that shipped on the dcs

 

[kingkongjr 10+ year member]

up- wouldnt mind trying out a pair of SA-12s if anyone has em

 

[alex95sl2 10+ year member]

i got 2 15 mts got fusion 4000d premier 860 mp clarion 920 eq anything caught ur eye pm me

 

[kingkongjr 10+ year member]

PMd homie^