Reply to thread

Message

<blockquote data-quote="BCotrell" data-source="post: 8705049" data-attributes="member: 666314">Basic Active 3 way will takes your system 5 channel.. front (tweeters channel 1&amp;2), middle (front midbass channel 3&amp;4) and rear (sub). Time alignment on the tweeters and midbass will make some significant improvements as will having separate filters on each speaker set (including both high pass and low pass on the mids) and a customizable crossover point for the mid&nbsp; and tweeter. That control of frequencies to each speaker will allow you to send more power to each speaker ( the value of each speaker to each channel of the amp)also coaxials in rear doors do nothing Positive to soundstage.... absolutely nothingTake a real swing at improvement. Ditch the coaxials and&nbsp; go to a basic 3 way active.That dsp is all you need...and a few additional rcas<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile&nbsp; &nbsp; :)" loading="lazy" data-shortname=":)" /></blockquote>

[QUOTE="BCotrell, post: 8705049, member: 666314"] Basic Active 3 way will takes your system 5 channel.. front (tweeters channel 1&2), middle (front midbass channel 3&4) and rear (sub). Time alignment on the tweeters and midbass will make some significant improvements as will having separate filters on each speaker set (including both high pass and low pass on the mids) and a customizable crossover point for the mid and tweeter. That control of frequencies to each speaker will allow you to send more power to each speaker ( the value of each speaker to each channel of the amp) also coaxials in rear doors do nothing Positive to soundstage.... absolutely nothing Take a real swing at improvement. Ditch the coaxials and go to a basic 3 way active.That dsp is all you need...and a few additional rcas:) [/QUOTE]

Verification