Reply to thread

Message

<blockquote data-quote="sdimeconcept" data-source="post: 2358213" data-attributes="member: 571897">I&#039;m definitely interested. Would you mind doing a sketchup for me? I&#039;m hoping to build it this weekend.It&#039;s for a wedge style box that&#039;s going to be ported...I&#039;m not really sure if this is the best... but the sub is going to be inverted. I&#039;m going to try and brace the box as well, but I&#039;m not sure exactly how to measure to see what the final enclosure volume is....WIDTH: 36 inchesDEPTH: 12 inchesHEIGHT 1(Back of box): 15 inchesHEIGHT 2(Front of box): 3 inchesTHICKNESS: .75 inchesEnclosure Volume: 1.57227 cubic feetRound port diameter: 3 inchesRound port length: 7.7 inches (Tuned to 35 Hz)This is for a 10&quot; Alpine TypeR 1022DIf you can do a sketchup of that for me, I&#039;d greatly appreciate it. Thanks.</blockquote>

[QUOTE="sdimeconcept, post: 2358213, member: 571897"] I'm definitely interested. Would you mind doing a sketchup for me? I'm hoping to build it this weekend. It's for a wedge style box that's going to be ported... I'm not really sure if this is the best... but the sub is going to be inverted. I'm going to try and brace the box as well, but I'm not sure exactly how to measure to see what the final enclosure volume is.... WIDTH: 36 inches DEPTH: 12 inches HEIGHT 1(Back of box): 15 inches HEIGHT 2(Front of box): 3 inches THICKNESS: .75 inches Enclosure Volume: 1.57227 cubic feet Round port diameter: 3 inches Round port length: 7.7 inches (Tuned to 35 Hz) This is for a 10" Alpine TypeR 1022D If you can do a sketchup of that for me, I'd greatly appreciate it. Thanks. [/QUOTE]

Verification