Reply to thread

Message

<blockquote data-quote="DeViOuSoNe" data-source="post: 2974849" data-attributes="member: 571162">Not sure where to post this, If it&#039;s wrong can Mod&#039;s Please move..thanksI have a 14 hp Briggs and stratton motor on my Riding Mower, I have just replaced all the following.Starter selinoidBatteryCleaned carbCarb floatCarb float NeedleThe Mower will start and run at idle, Still doesnt idle smooth though. But once I out it in gear and try to move, It will right away cut back idle, and backfire loud as shit! Would this be due to getting to much gas or not enough? Should I change the Sparkplug? Or could the carb still need cleaning?I would think the carb is clean, Since I used the carb cleaner in the Bucket, and let it sit...And all looked clean, But there is one Screw on the outside of carb that was barely in when I bought It...Im thinking AirFuel Ratio?Thanks for any help?</blockquote>

[QUOTE="DeViOuSoNe, post: 2974849, member: 571162"] Not sure where to post this, If it's wrong can Mod's Please move..thanks I have a 14 hp Briggs and stratton motor on my Riding Mower, I have just replaced all the following. Starter selinoid Battery Cleaned carb Carb float Carb float Needle The Mower will start and run at idle, Still doesnt idle smooth though. But once I out it in gear and try to move, It will right away cut back idle, and backfire loud as shit! Would this be due to getting to much gas or not enough? Should I change the Sparkplug? Or could the carb still need cleaning? I would think the carb is clean, Since I used the carb cleaner in the Bucket, and let it sit...And all looked clean, But there is one Screw on the outside of carb that was barely in when I bought It...Im thinking AirFuel Ratio? Thanks for any help? [/QUOTE]

Verification