Reply to thread

Message: <blockquote data-quote="saltyreefguy" data-source="post: 2013425" data-attributes="member: 564722">i found out that running in series was incorrect? got the correct diagram to get final 4 ohms, after it was all re-wired, can it be checked with a dmm to make sure the ohm rating is correct? or not possible?also it was recommended for jl audio subs not to be wired in series to be avoided, well i did mistakenly wired them/series and played music on them during trial testing, was there any harm done to them?anyone can offer some advice on the jumper wires on each sub?</blockquote>

Top