Reply to thread

Message

<blockquote data-quote="deepthump17" data-source="post: 4115349" data-attributes="member: 586409">Need some help on picking amps for my 2 alpine type r&#039;s at 4ohms (wiring to 1 ohm) and also a component set most likely the CDT EF-61CFi/25 or the PG RSD&#039;s.The alpine&#039;s are gunna be in a ported box with min. of 1.7 cu ft. per sub. Looking to run them around 600-700rms as that&#039;s what most people reccomend. Max of 250 for the amp looking for less. I was considering the Hifonics BXi 1606D but it seems sketchy.. So suggest away!Also looking to run just a Front Set of components at around 150rms maybe a bit more and not exactly sure on the type, most likely the ones listed above. What would you suggest for under 180? I was thinking Hifonics ZXi 4406 (sketchy) or the MTX Audio XThunder 504X (most likely) but once again suggestions much appreciated.Thanks.EDIT: I need the sub amp to run at 1ohm stable, pushing at least 1400 watts, the hifonics does 1600 but it might be overrated?</blockquote>

[QUOTE="deepthump17, post: 4115349, member: 586409"] Need some help on picking amps for my 2 alpine type r's at 4ohms (wiring to 1 ohm) and also a component set most likely the CDT EF-61CFi/25 or the PG RSD's. The alpine's are gunna be in a ported box with min. of 1.7 cu ft. per sub. Looking to run them around 600-700rms as that's what most people reccomend. Max of 250 for the amp looking for less. I was considering the Hifonics BXi 1606D but it seems sketchy.. So suggest away! Also looking to run just a Front Set of components at around 150rms maybe a bit more and not exactly sure on the type, most likely the ones listed above. What would you suggest for under 180? I was thinking Hifonics ZXi 4406 (sketchy) or the MTX Audio XThunder 504X (most likely) but once again suggestions much appreciated. Thanks. EDIT: I need the sub amp to run at 1ohm stable, pushing at least 1400 watts, the hifonics does 1600 but it might be overrated? [/QUOTE]

Verification