Reply to thread

Message

<blockquote data-quote="varano_ohms" data-source="post: 8668054" data-attributes="member: 676349">I have identified the two + 12V cables with the DMM now I know which ones are at 8A and at 14 A&nbsp; &nbsp; to power the radio I&#039;m using + 12V 8A&nbsp; &nbsp; are they enough or should I use the 14A one?&nbsp; &nbsp; (at the moment the radio turns on and it works)so you need to connect all the yellow cables and then put a 25A fuse with an AWG8 cable?&nbsp; &nbsp; (since for the radio it is sufficient to use the 8A one)&nbsp; &nbsp; if I connect the yellow cables the power supply to the radio must come from the biggest cable AWG8?the other cables (red, black) I have to connect them together or I leave them free?connecting the various yellow + 12V cables I would not have the sum of currents above 22A since each cable carries respectively 8A and 14A&nbsp; &nbsp; (example sum 4 yellow cables all from 14A I get 14Ax4 = 56A)</blockquote>

[QUOTE="varano_ohms, post: 8668054, member: 676349"] I have identified the two + 12V cables with the DMM now I know which ones are at 8A and at 14 A to power the radio I'm using + 12V 8A are they enough or should I use the 14A one? (at the moment the radio turns on and it works) so you need to connect all the yellow cables and then put a 25A fuse with an AWG8 cable? (since for the radio it is sufficient to use the 8A one) if I connect the yellow cables the power supply to the radio must come from the biggest cable AWG8? the other cables (red, black) I have to connect them together or I leave them free? connecting the various yellow + 12V cables I would not have the sum of currents above 22A since each cable carries respectively 8A and 14A (example sum 4 yellow cables all from 14A I get 14Ax4 = 56A) [/QUOTE]

Verification