Reply to thread

Message: <blockquote data-quote="daboyfrumdabx" data-source="post: 7168921" data-attributes="member: 617760">LPF should be set somewhere near 85hz. Phase at 0. Bass boost at 0. Subsonic a few hz below your boxes tuning if your new box is ported. For now just set it in the high 30's low 40's as that box your have now is likely tuned in the 40's. Then read up on how to properly set your gain. 3/4 up may be too high or it may not be high enough but it needs to be set according to the input voltage so read up. You'll definitely get more output from the R, especially if you're building a proper box for it.<a href="http://forum.realmofexcursion.com/amplifiers/69112-gain-setting-tutorial-2010-a.html" target="_blank">gain setting tutorial 2010 - Realm of Excursion</a></blockquote>

Top