Reply to thread

Message: <blockquote data-quote="AflacDuck" data-source="post: 6745502" data-attributes="member: 620675">I am installing my first amplifier and subs and I have come to a road block and I was hoping for some help.I am installing a Power Accoustik 1600w amp on a set of 12's. I have a stock head unit so I had to get a crossover. I spliced into my 2 stock 6x9's to run into the low level inputs on the crossover the ran the red and white high level outputs to my amp.I am confused as to what I do about the remote wire though. Someone told me I can splice into the positive on one of my speakers and it should function properly. then if that works do I go to the amp first or the crossover first.Also, do I just jump off of the power and ground from the amp to the crossover or do I have to run a separate power and ground wire just for the crossover?</blockquote>

Top