Reply to thread

Message: <blockquote data-quote="fury" data-source="post: 487223" data-attributes="member: 555246"><p>If you're gonna be running 2.. you're gonna have 3000 watts of power going into your subs.  I dont think theres any remote possibility you'll be able to tell that extra 200 watts.  A brutus on each xxx would be great.  LOTS of success stories with that combo.  If you have 2 subs 2 amps, and you're going with the brutus, just get the standard dual 2 ohm xxx's.  Then run each one to its own amp for 1 ohm loads on each.  That'll give you full power out of the brutus.  Check <a href="http://www.jlaudio.com" target="_blank">http://www.jlaudio.com</a> for help on wiring dvc 2 ohm into 1 ohm.</p></blockquote><p></p>

Top